Model 92 RF Meter
Fields (Up to 3.5 GHz)
7-Day Rental: $55 (Not Available for Purchase)
This meter has been discontinued.
Unfortunately, not available for purchase.
This is the meter we recommend for
sensitive, accurate and affordable measurements for most of the RF/microwave
fields. The TES 92 meter measures both analog and digital fields, and is
very good for digital microwaves up to 3.5 GHz.
Important Feature #1:
The TES 92 detects most of the digital microwaves emitted by cell phones, Wi-Fi
and wireless devices very well — the same EMFs which
"anecdotally" appear to be troublesome for many sensitive individuals.
Important Feature #2: The
TES 92 is a triple-axis meter. This allows you to take quick, easy and
accurate measurements. Also, measurement options include selection of
instantaneous (peak), average, or maximum readings, plus other helpful features.
Key Features and Specifications...
Name of Meter: TES
Model 92 Electrosmog RF Meter
Test Meter Measures: Radio
frequency (RF) and microwave fields.
50 MHz up to 3.5 GHz.
Type of Fields:
Both digital and analog RF/microwave fields.
Display. Instantaneous, maximum or average measurement modes.
Units of Measure:
Measures field strength in microwatts per centimeter squared
(µW/cm²), microwatts per meter squared (µW/m²),
microamps per meter (µA/m) or millivolts per
field strength as low as 0.001 µW/cm², 0.1
µW/m², 0.1 µA/m and 0.1 mV/m.
Easy to Use: Both
triple and single-axis sensing available. Using the triple-axis sensor,
you can hold the meter in any orientation and get an accurate three dimensional
Uses one standard 9 Volt battery (included).
Advertised Battery Life:
Up to 15 hours
Carrying case, manufacturer's instructions, plus our own easy-to-understand instructions and safety level recommendations.